Authors
Xuewei Fu, Haotian Wang, Qiying Zhang, Yue Han, Sai Li, Liqun Zhang, Ruisi Chen, Weifeng Zhang, Jun Liu
Published in
ACS applied materials & interfaces. Jul 10, 2026. Epub Jul 10, 2026.
Abstract
Aluminum nitride (AlN) is highly regarded for its high thermal conductivity and electrical insulation, making it a promising filler for thermal interface materials (TIMs). However, its practical application is limited by the hydrolysis of its crystal structure in humid environments, which causes performance degradation. Existing surface modification methods also struggle to simultaneously achieve high processing efficiency and enhanced material performance. To address these issues, we developed a novel surface modification strategy involving the grafting of sulfhydryl groups onto AlN particles, followed by encapsulation with a liquid metal (LM) layer. The resulting LM@AlN fillers were then incorporated into a polydimethylsiloxane (PDMS) matrix and cured to form thermally conductive composites. The LM@AlN/PDMS composite exhibits a through-plane thermal conductivity of 1.83 W·m-1·K-1 and an in-plane thermal conductivity of 20.32 W·m-1·K-1, along with a tensile strength of 1.46 MPa and an elongation at break of 168.73%. It also demonstrates excellent stability in deionized water and under high-temperature, high-pressure conditions, with minimal changes in thermal conductivity (1.9% and 3.0%, respectively) and no leakage of liquid metal. This enhanced stability improves the practicality of liquid metal composites and broadens their potential for applications in wearable electronics and soft robotics.
PMID:
42429040
Bibliographic data and abstract were imported from PubMed on 10 Jul 2026.
Read full publication at:
Please sign in
to see all details.
Advertisement
Stats
- Recommendations n/a n/a positive of 0 vote(s)
- Views 40
- Comments 0