Authors
Mohammad Irfan, Chinthalapudi Naga Lakshmi, Narendra Singh
Published in
Langmuir : the ACS journal of surfaces and colloids. Volume 42. Issue 44. Pages 32346-32362. Nov 10, 2026.
Abstract
Oil-water separation presents a global challenge, mainly attributed to the rising incidents of oil spills during large-scale oil transportation and the discharge of substantial quantities of organic pollutants by industries. In this research, Co3O4@ZnO-PDMS-coated nickel foam (NF) and copper foam (CF) composites were successfully synthesized utilizing hydrothermal assisted dip-coating method. In situ grown Co3O4@ZnO hierarchical structure on three-dimensional (3D) metallic foams was coated using PDMS polymer. XRD data confirmed the formation of Co3O4 and ZnO phases in the as-prepared metallic foams. Vibrational bands of metal-oxygen and silicone (Si-C/Si-O-Si)-based bonds confirm successful PDMS deposition. Surface morphology demonstrates 3D interconnected pores with in situ Co3O4@ZnO hierarchical structure and PDMS coating. XPS analysis confirms the surface chemical states and elemental composition of Co3O4@ZnO-PDMS-coated NF and CF. As-prepared metallic foams exhibited superhydrophobicity with excellent WCAs of 152° ± 1.5° and 152° ± 1.1° and CAHs of 4.2° ± 1.0° and 6.5° ± 2.6°. Superhydrophobic/superoleophilic properties enabled the as-prepared metallic foam to show effective oil-water separation with a good flux range of 4710 ± 223 L m-2 h-1 to 8469 ± 110 L m-2 h-1, high separation efficiency (>97%), and reusability. The as-prepared metallic foam also enabled efficient gravity-driven surfactant-stabilized water-in-oil (W/O) emulsion separation with different surfactant concentrations, achieving a water rejection of up to 94.9%. The Cassie-Baxter wetting model interpreted the oil-water separation mechanism based on wettability measurements and intrusion pressure analysis. Co3O4@ZnO-PDMS-coated NF and CF composites retained hydrophobicity even after a thermal stability (50-200 °C) test and a strong acid-alkaline (pH 1-9) resistance test. Sandpaper abrasion cycle tests confirm its robustness, and by immersing in 3.5 wt % NaCl solution for 7 days, showed its anticorrosive properties.
PMID:
43007114
Bibliographic data and abstract were imported from PubMed on 10 Nov 2026.
Read full publication at:
Please sign in
to see all details.
Advertisement
Stats
- Recommendations n/a n/a positive of 0 vote(s)
- Views 9
- Comments 0